Microprocessors Price list in India

Problems Title
Generic 30-WGL-200GVB Wall Control Galvanized Steel Pegboard Tool Organizer

Generic 30-WGL-200GVB Wall Control Galvanized Steel Pegboard Tool Organizer

Wall control's patented line of American made metal pegboard products will last a lifetime while offering the highest quality tool storage available and at an exceptional value. From the garage to the kitchen to the garden shed, wall control's heavy duty wall mounted pegboard organizers have your storage and organization needs covered. End your frustration with inferior storage systems today and invest in an American made wall control storage system that is engineered for life.

Arduino Mega 2560 Microcontroller by Robokart

Arduino Mega 2560 Microcontroller by Robokart

Microcontroller: ATmega2560, operating voltage: 5V, input voltage (recommended): 7-12V, input voltage (limits): 6-20V, 54 I/O pins (of which 14 provide PWM output), analog input pins: 16, DC current per I/O pin: 40 mA - 50 mA, flash memory: 256 KB of which 4 KB used by bootloader, SRAM: 8 KB, EEPROM: 4 KB.

Easy Electronics Arduino Nano V3 With Usb Cable"

Easy Electronics Arduino Nano V3 With Usb Cable"

Easy Electronics: Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB ( cable colour might change from the one shown in picture)Note: Need to install CH341SER driverMicrocontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 VDigital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mAFlash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz"

Easy Electronics Arduino Nano V3 with USB Cable

Easy Electronics Arduino Nano V3 with USB Cable

Easy Electronics: Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB ( cable colour might change from the one shown in picture)Note: Need to install CH341SER driverMicrocontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 VDigital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mAFlash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz"

Atmel Electrobot ATmega328 PU PDIP-28 Microcontroller IC with Arduino UNO Bootloader

Atmel Electrobot ATmega328 PU PDIP-28 Microcontroller IC with Arduino UNO Bootloader

  • The high-performance Microchip 8-bit AVR RISC-based microcontroller combines 32KB ISP flash memory with read-while-write capabilities, 1KB EEPROM, 2KB SRAM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts,serial programmable USART, a byte-oriented 2-wire serial interface, SPI serial port, 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, and five software selectable power saving modes. The device operates between 1.8-5.5 volts.

  • Specifications:
  • Package/Case - PDIP-28
  • Minimum Supply Voltage - 2.7V
  • Maximum Supply Voltage - 5.5V
  • No. of I/Os - 23
  • No. of Timers/Counters - 3 Timer
  • Product Type - 8-bit Microcontrollers - MCU
  • Mounting Style - Through Hole
  • Product Series - ATmega328P
  • Maximum Clock Frequency - 20 MHz
  • Data Bus Width - 8 bit
  • Interface Type - I2C, SPI, USART
  • Program Memory Size - 32 kB
  • Data RAM size and Type - 2kB SRAM
  • Data ROM Size and Type - 1024 B EEPROM
  • Operating Temperature Range -24ºC ~ 84°C
  • Dimensions (mm) LxWxH - 34.8 x 7.5 x 4.57

  • Package Includes:
  • 1 x ATmega328P-PU PDIP-28 Microcontroller
  • Generic Imported Max485 Rs-485 Module TTL Module For Arduino Raspberry Pi DIY

    Generic Imported Max485 Rs-485 Module TTL Module For Arduino Raspberry Pi DIY

    On-board MAX485 chip is a low-power and slew-rate-limited transceiver used for RS-485 communication. It works at a single +5V power supply and the rated current is 300 ?A. Adopting half-duplex communication to implement the function of converting TTL level into RS-485 level, it can achieve a maximum transmission rate of 2.5Mbps. MAX485 transceiver draws supply current of between 120?A and 500?A under the unloaded or fully loaded conditions when the driver is disabled. The driver is limited for short-circuit current and the driver outputs can be placed at a high impedance state through the thermal shutdown circuit. The receiver input has a fail-safe feature that guarantees logic high output if the input is open circuit. In addition, it has a strong anti-interference performance.   Description: MAX485 chip is a low power consumption for RS-485 communication, limit the slew rate transceiver Then 5.08 (mm) pitch 2P terminal, convenient RS-485 communication wiring Chip leads all pins can be controlled through the microcontroller Operating voltage: 5V Size: Approx.44  x 14 mm/ 1.73 x 0.55inch   Package includes: 1 x Module

    ARK Technosolutions Arduino Nano With ATmega328

    ARK Technosolutions Arduino Nano With ATmega328

    The Arduino Nano Is A Small, Complete, And Breadboard-Friendly Board Based On The ATmega328 (Arduino Nano 3.X) Or ATmega168 (Arduino Nano 2.X). It Has More Or Less The Same Functionality Of The Arduino Duemilanove, But In A Different Package. It Lacks Only A Dc Power Jack, And Works With A Mini-B Usb Cable Instead Of A Standard One. The Nano Was Designed And Is Being Produced By Gravitech.

    easy electronics Arduino Nano V3 with USB Cable

    easy electronics Arduino Nano V3 with USB Cable

    Easy Electronics:

    Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB ( cable colour might change from the one shown in picture)
    Note: Need to install CH341SER driver
    Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V
    Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA
    Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz

    Arduino Pro Mini Atmega 328p, Compatible  Board Smaller Than Nano,  UNO

    Arduino Pro Mini Atmega 328p, Compatible Board Smaller Than Nano, UNO

    Features: 100 percent brand new and high quality. New mini atmega328 replace aTmega128 for Arduino-compatible Nano module. Material: pieceB. Color: Green. Size: About 34*18mm or 1.34*0.71". Package Included: 1 x Arduino pro min atmega328p board. 3 x Gilded Pin

    Bot